The construction machinery industry has stabilized in the first half of the year and will grow in the second half of the year

According to the latest statistics of China Construction Machinery Industry Association, after the continuous decline of China's construction machinery industry in the first quarter of this year,

In April and May, there were signs of stabilization, and the industry's decline was slowing down.

According to statistics, in the first half of the year, the sales volume of major products in the industry was adjusted steadily, and the decline in the sales volume of the industry narrowed. Loader sales in the first quarter of 2013

41,486 units were sold, down 19% year-on-year, 12.2% year-on-year in January-April, and 7.36% year-on-year in January-May. First quarter bulldozer sales

2,589 units, down 1.45% year-on-year, 1.51% year-on-year from January to April, and 1.5% year-on-year from January to May. First quarter excavator sales

32,822 units, down 25.68% year-on-year, 17.5% year-on-year in January-April, and 13.9% year-on-year in January-May, the decline was significantly narrowed.

The market is still sluggish

In the first half of this year, China's construction machinery industry did not start to rise as predicted, and the market remained sluggish. As of May,

Several major economic indicators in the industry have declined to varying degrees.

The main business income declined significantly. According to the statistics of the China Machinery Industry Federation, the main business income of the construction machinery industry from January to April was year-on-year.

The decline of 6.57% is one of the two industries in the 13 industries of the machinery industry, far lower than the average of 12.75% of the entire machinery industry during the same period.

Both increase in speed.

The decline in production is large. It is understood that from January to May, the output of most products of construction machinery continued to decline. In May, shoveling transport machinery,

The output of excavators and loaders decreased by more than 5% year-on-year. Among them, the excavator has a large decline, although the decline is narrowed by 6.95 percentage points from April, but

It still fell by more than 10 percentage points year-on-year. However, the output of compaction machinery increased slightly, up 3.5% year-on-year, and the decline was 8.23 percentage points lower than that in April.

Overall, from January to April, the decline in finished products of the construction machinery industry was 10.56%.

Sales also declined slightly. From January to May this year, 26 major loader manufacturers in China sold a total of 83,226 loaders, a year-on-year decline.

7.36%, although the decline, but the trend is significantly slower; and in May alone, a total of 19,045 loaders were sold, an increase of 13.67% year-on-year.

In May, domestic excavator products achieved sales of 11,547 units, an increase of 6.23% year-on-year; excavator exports amounted to 712 units, an increase of 1.14% year-on-year.

The year-on-year growth rate of excavator sales continued to improve, maintaining a small increase. In addition, according to the statistics of the China Construction Machinery Industry Association

According to statistics, according to the statistics of the main manufacturers of 13 graders, in May 2013, a total of 395 graders were sold, a decrease of 64 units over the same period last year.

It was down 13.9% year-on-year. The domestic sales volume of graders was 196 units, down 18.3% year-on-year, and domestic sales accounted for 49.6% of total sales, down 2.7 points year-on-year.

percentage point. From January to May, the cumulative sales of graders was 1,750 units, a decrease of 230 units year-on-year, down 11.6%.

More rational industry

Last year, China's construction machinery industry completed sales revenue of 562.6 billion yuan, an increase of 2.96% over 2011, but agents and manufacturers

Did not feel the growth. The sales revenue of 13 manufacturers' groups in 2012 fell by more than 3%. The growth of the total industry is mainly due to national statistics.

The elevators that increased by 20% in 2012 will be included in the construction machinery industry.

Nevertheless, the overall trend of the construction machinery industry in recent years is good. British consulting firm also predicts that by 2017, West

Overseas construction machinery markets such as Europe and North America will also grow slowly, with the highest growth rate of 9%. But at the same time, any market, its fluctuations

All exist. As an industry enterprise, it will definitely encounter the climax and low point of the market, which requires the company to have a more peaceful attitude and do a good job of product quality.

Volume, reducing the impact of market volatility. For example, in March this year, 27 key enterprises in the industry, excavator sales exceeded 20,000 units; but to 4

In the month, this figure fell back to 16,000 units, and in May it continued to fall.

Not only construction machinery, but also the real economy such as equipment manufacturing and garment manufacturing, do not feel the obvious improvement of investment. Despite the long-term

Look, as of 2017, investment in road construction, airport construction and railway construction will still exceed 4 trillion yuan. But once the construction machinery "gold

The explosive growth of the decade is unlikely to happen in the future, just as China Construction Machinery Industry Association President Jun Jun in 2013 China Engineering Machine

The Elite Agent Hotspot Forum stated, "The Chinese economy is undergoing structural adjustment due to various factors. I think engineering machinery

The overall trend of the industry is good. But everyone must have a full mental preparation, with a 33% annual growth rate of construction machinery before 2011,

Will not have it again. Both the Chinese economy and the Chinese construction machinery industry will move toward rationality. ”

Su Zimeng, secretary general of China Construction Machinery Industry Association, also said in public that from the statistical data, the overall sales volume and business of the industry

The income shows a negative growth trend, but this is not a downturn in the industry, but a “pain period” from rapid growth to stable growth.

Although it is difficult for the industry to return to the high-speed growth level before 2011, the ups and downs will rarely occur. In the future, the national steady growth policy will pull

The dynamic effects will gradually appear (such as shantytown renovation, etc.), the overall situation of the industry is still optimistic, and will show a stable and sustainable development.

Second half or growth

Xu Shaoshi, director of the National Development and Reform Commission, said on August 1 that it will formulate and publish urbanization development plans and related policies, and plan and push

Reforming household registration, land, finance, taxation, and social security to improve the quality of urbanization.

Xu Shaoshi proposed to speed up the implementation of the key tasks of the 12th Five-Year Plan, strengthen the construction of railway and other transportation infrastructure, and increase the number of shacks

District transformation and supporting infrastructure investment, accelerate the implementation of rural power grid transformation and upgrading projects. So many engineering projects can be slowed down to some extent

Solve the current development trend of the construction machinery industry, or make it into the rising channel.

According to the reporter, the relevant documents for restarting the high-speed rail investment have been reported and are expected to be approved in the near future. If the investment is really approved, it will become a construction machine.

The industry has a strong industry recovery signal. Railway construction is bound to drive the growth of construction machinery to a certain extent. After the downturn in the first half of the year,

The pulling of various projects in the second half of the year may inject a dose of cardiotonic agent into the construction machinery industry, so that it will go out of the trough and rise steadily.